After seeing how simple it was to build and install the bones of a wall, my next task was to build the walls of the shower and the wall hiding the toilet. I started with the toilet wall because it seemed to be the most simplest at the time. Normally, a house would have level ceilings so the wall I had to build would just consist of my nailing 2x4s to the ends of 3 7.5' 2x4 boards. But of course, this was not the case. I had to individually measure each board, cut it, and then make sure it fit before nailing on the ends that got nailed to the ceiling and the floor.
In this view you are looking into the the corner of the bathroom. The door to get into the bathroom is to the right (not shown) and the door you do see is the door to the closet filled with 2x4s. After building the toilet wall, I now had to construct the shower walls. I decided to make them 4' tall. At this point we aren't sure if we are going to put glass on the tops of the walls or if we are just going to leave them bare. I guess it just depends on if too much water splashes out. Anywho, These walls were by far the easiest to complete.
The window you see in the right of the picture is where the toilet is (getting a visual?). That white post sticking out of the floor is where the shower water will be coming from. If you are wondering what is on the walls, the walls are concrete and what you see is a mix of light blue paint and glue for the old bathroom shower, oh and who can forget the tar on the wall.
Here's a pic of me building one of the shower walls. You can see the bathroom door behind me. And if you are wondering what that brick thing is behind me, it is the chimney for the old fireplace that used to be downstairs but was later removed. The chimney was covered with concrete but I wanted to expose it in the bathroom and set the vanities on either side. It's just added character to this awesome old house.
Steffane B